This SFP Media Converter is an Ethernet media converter that converts media transmission between UTP
Copper cables and fiber SFP (Small Form-Factor Pluggable) transceivers.
This series SFP media converters are designed to meet the massive needs for Ethernet network deployment
and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 120km.
The series SFP media converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed
into a Standard Converter Chassis. The installation & operation procedures are simple & straight forward.
Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.
Conversion between different transmission speeds and media types
Standalone and compact hardware design
Auto-negotiating Ethernet port (Half/Full Duplex)
Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
Built-in Link Loss Forwarding Technology
Easy Installation, Easy Trouble shooting
IEEE 802.3z 100Base- SX/LX standards
IEEE802.3x Flow Control and Back pressure
Connector and Interface
Fiber: FE SFP
Copper: RJ45 (10/100Mbps)
MDI/MDI-X and Auto-Negotiation Function Support
LED Indication: FEF,SPD,FX-LINK,TX-LINK,PWR,FDX
Power: External power supply
Dimension: 95 ¡Á70 ¡Á26mm(out) power external
Link Loose Forward
TX to Fiber: If TX port link is broken, then the media converter will force the fiber to link down.
Fiber to TX: If Fiber port link is broken,the media converter will force the TX port to link down.
DIP Switch 1: Fiber Auto-Negotiation/100Mbps FulDuplex mode
DIP Switch 2: TX to Fiber LLF (Link LoseForwarding) Disable/Enable
DIP Switch 3: Fiber to TX LLF (Link LoseForwarding) Disable/Enable
Operating temperature: 0¡ãC ~ 70¡ãC
Storage temperature: -40¡ãC~ 85¡ãC
Operating humidity: 10% ~ 90%, non-condensing
The 10/100 Fast Ethernet Media Converter supports industry standard FE SFPs.
Click here: email@example.com to get the price.